CO2 INJECTION SYSTEM with Timer
$159.99
Hydrofarm delivers a CO2 injection system complete and ready-to-use in your garden. Includes 15-minute/24-hour timer. Requires compressed gas tank.
|
PROPANE TANK CHANGE-OVER VALVE
$79.95
Valve Assembly comes complete and ready to hookup to two propane tanks. Automatically switches to the full tank when the other is empty.
|
CAP CO2 MONITOR/CONTROLLER
$449.99
This easy-to-use and affordable CO2 controller (Model PPM-3)is a tool that any indoor gardener will appreciate.The Controller accurately measures CO2 level from 0- 5,000 PPM (parts-per-million). Customers simply plug in their CO2 generator to the Generator Controller and the Controller automatically maintains their specified level.The Generator Controller works with any 120 volt CO2 generator or valve. Controller carries a 3-year warranty.
|
iGS-061 CO2 CONTROLLER
$575.99
Economical and easy to install and set-up. Automates any Co2 tank or generator. High temperature shut-off function turns off CO2 when the temperature is too high.
|
G.A. CO2 MONITORS / CONTROLLERS
From Green Air Products, the infrared CO2 Monitor gives LCD readings of the exact CO2 levels in the garden area. The Carbon Dioxide Digital Sequencer is what transforms the CO2 Monitor into a powerful versatile control.
The Monitor and Controller is available as a ready-to-use package, requiring no other equipment to operate your CO2 injection or generator system. Just plug in your CO2 system, set the desired level of CO2 and this system handles the rest. The CDMC-6 uses the wall-mounted monitor and the CDMC-7 uses the portable monitor. Both the monitors and the controller are also sold separately.
CO2 Monitor with Controller (CDMC-6) $814.99
CO2 Monitor Only (Model 6000) $404.99
CO2 Controller Only (CDDS-2) $409.99
|
CAP. ELECTRONIC IGNITION CO2 GENERATORS LP
C.A.P. has developed some of the safest and most reliable CO2 Generators. They are capable of producing between 3 and 26 cubic feet of CO2 per hour. C.A.P. manufactures 2 models, The GEN-1 and the GEN-2. The GEN-1 is recommended for small to medium size areas up to 15’ x 15’. The GEN-2 is recommended for larger areas up to 30’ x 30.Both the GEN-1 and the GEN-2 units feature a Pilotless Electronic Ignition, instead of the traditional "pilot light." They both come with a standard "tip-over" switch will shut down the fuel to the main burner in the event the unit falls or tips over.
CAP Gen-1 LPE (liquid propane) $424.99
CAP Gen-2 LPE (liquid propane) $575.99
CAP Gen-1 NGE (natural gas) $424.99
CAP Gen-2 NGE (natural gas) $575.99
CAP Expansion Burners $29.99
|
ATMOSPHERIC CONTROLLER w/Photocell
$249.99
Another useful controller from Green Air Products ,CT-DH-3P, is designed primarily to be used with CO2 and exhaust equipment. Set the desired temperature and humidity levels and the unit turns on exhaust equipment and turns off CO2. Built-in photosensor shuts down CO2 production during darkness while allowing ventilation to operate 24 hours. Use with the Cyclestat or other timer for complete control of CO2 systems. Go here for more info: http://greenair.com/coold.htm
|
EXHAUST BLOWERS
ActiveAir blowers from Hydrofarm are designed with the gardener in mind. The blowers are equipped with a duct adapter built in. No extra parts to buy.
Exhaust Blower-180cfm $79.99
Exhaust Blower-265cfm $90.99
Exhaust Blower-465cfm $99.99
|
TEMP STAT ( Heating or Cooling)
$139.99
The Temp-H/C Temperature Controller is our most recent development in temperature control. Designed for controlling either heating or cooling equipment. Toggle switch allows switching between heat and cool modes. Will control fans, air conditioners, heaters or other equipment simply by setting the desired temperature. Dependable accurate 7% differential. 120 volts, 15 amp.
|
TOTAL HUMIDITY CONTROLLER
$130.99
Green Air's Total Humidity Controller controls humidity automatically and acurately. Easily switch between dehumidifying and humidifying. Controls vent fans or other equipment. A popular controller for removing unwanted atmosopheric moisture accumulating within an enclosed area. Turns on and off equipment according to the desired humidity level dialed into the unit. Keeps humidity down to control fungus. 120 volts, 15 amp.
|
iGS TEMPERATURE CONTROLLER
$97.99
Plug 'n' Grow makes this affordable iGS Model-021 Temperature Controller with out display. Turns on and off cooling or venting equipment. It can be set to Heat or Cool with day and night setpoints.
|
\